We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Liquitex Basics 12 Tube Acrylic Paint Set 22ml: A Beginner’s Guide

Learn how to get the most from a Liquitex Basics 12 tube acrylic paint set 22ml, from mixing colors and thinning paint to caring for your tubes.

Updated November 2026

A Liquitex Basics 12 tube acrylic paint set 22ml gives you a compact, workable palette for learning acrylics. In this guide, you will learn how to set up your workspace, mix the core colors, control paint consistency, and store your tubes so they last. The steps below assume no prior painting experience.

Set Up Your Workspace Before You Open the Tubes

Acrylic dries fast, so preparation matters more than with oil. Work on a surface that can take water and paint, such as cold-press watercolor paper, canvas panels, or primed wood. Cover your table with a plastic sheet or craft paper, and keep a spray bottle and a damp rag nearby to keep brushes and palettes from drying out.

Shopping for one? See our guide: Liquitex Basics Acrylic Paint Set Review: Is It Worth It?.

Learn the Twelve Colors and What They Do

Most people use a basic set to mix their own shades rather than squeezing straight from the tube. Start by laying out your colors in the same order each time so you can find them quickly. Then test simple mixes on a scrap sheet:

  1. Mix a small amount of white with each color to see how tints change the value.
  2. Mix two primaries to create secondaries, such as a blue and yellow for green.
  3. Add a touch of black or the complement of a color to darken or dull it. A little goes a long way.
  4. Write the mixing ratio on a scrap label so you can repeat good results later.

Control Paint Consistency with Water and Mediums

Liquitex acrylics are fairly thick straight from the tube, which suits opaque blocks of color. For thinner washes, add water a few drops at a time and stir thoroughly. Mixing too much water weakens the binder, so keep most of your paint near full strength and thin only what you need.

Goal Approach
Opaque coverage Use paint straight from the tube, one thin layer at a time
Transparent wash Thin with water in small amounts and build in layers
Slower drying Use a retarder or work in a cooler, more humid space

If you want a deeper introduction to how the paints behave, the guide Liquitex Basics Acrylic Paint Set: 48 Colors Guide for Beginners covers consistency and layering in more detail.

Store and Care for Your Tubes

Acrylic paint can dry out in the tube if the cap is left open or the tube is squeezed unevenly. Wipe the threads clean before capping, press the air out of the tube as you go, and lay tubes flat or upright in a storage box. Keep them away from freezing temperatures, which can ruin the emulsion. Dried paint on the cap can be removed with a damp cloth, and sealed tubes will often keep working for a long time.

Common Mistakes to Avoid

  • Leaving the palette out for long periods. Acrylic skins over quickly, so mix only what you can use within an hour or two.
  • Adding too much water. Diluted paint loses adhesion and can flake off the surface.
  • Skipping the test swatch. Paint dries darker or lighter than it looks wet, so test each mix before committing.
  • Using the same brush for every color. Rinse between colors or your mixes will turn muddy.
  • Forgetting to cap tubes. Even a short time open can leave a crust that clogs the nozzle.

A few basic tools make the set easier to use right away.

  • A stack of acrylic-friendly palette paper or a plastic palette, since acrylic can stain wood and dries quickly on most surfaces. View on Amazon
  • A set of synthetic flat and round brushes, which hold up better to acrylic than natural bristles. View on Amazon
  • A spray bottle for misting paint and keeping mixes workable during a session. View on Amazon

FAQ

Can I use this set on canvas and paper?

Yes. Acrylics adhere well to canvas, primed panels, and heavier mixed-media paper. Thin paper may buckle when wet, so choose a sturdy sheet for the best results.

How do I keep paint from drying on my brush?

Rinse the brush in water between sessions and reshape the bristles while they are damp. Work quickly and keep a spray bottle close by during longer sessions.

Do I need a medium to use these paints?

No. You can paint with water alone for many projects. A medium such as a gloss or matte varnish is useful later for finishing and protecting a piece.

Conclusion

With a clear workspace, a few simple color-mixing tests, and careful tube storage, a Liquitex Basics 12 tube acrylic paint set 22ml can cover a surprising range of projects. Start small, keep your mixes fresh, and build your skills one layer at a time. Check the manufacturer’s label for the most current product details.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our arts & crafts supplies guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Crafts Center.