Liquitex Basics Acrylic Paint Set: 48 Colors Guide for Beginners
Learn how to get the most from a Liquitex Basics acrylic paint set: 48 colors, from choosing a palette and mixing to brushes, surfaces and storage.
Updated November 2026
A Liquitex Basics acrylic paint set with 48 colors gives you a wide palette in one box, so you can skip buying single tubes while you learn. This guide explains what to expect from a set this size, how to organize and test the colors, and how to start painting without wasting paint. The steps work whether you paint on canvas, paper or wood.
What a 48-Color Set Covers
A large set is useful because it puts most hues within reach, but it also means you will not use every color equally. Manufacturers typically describe the Basics line as a student-grade acrylic, which means the pigment load is lower than in artist-grade paints and the colors are a little less intense. Expect good coverage for practice and general projects, and plan to mix or upgrade for final pieces that need maximum vibrancy.
Shopping for one? See our guide: Liquitex Basics Acrylic Paint Set Review: Is It Worth It?.
Before you open the tubes, check the set’s color chart against your subject matter. Landscape painters will lean on greens and earth tones, while illustrators will reach for brighter primaries and blends.
Set Up Your Palette Before You Paint
Organization saves paint and time. Work through these steps once, and the rest of your sessions will go faster.
- Label the cap or tube of each color with a permanent marker, or keep the chart beside you if the tubes are already clearly marked.
- Group colors into warm, cool and neutral families so you can find them quickly.
- Squeeze small amounts, about a pea-sized dab per color, onto a palette. Acrylic dries fast, so smaller dabs stay workable longer.
- Keep a spray bottle or wet palette nearby if you work in a dry room.
- Cap every tube tightly after use. Wipe the threads first so the lid seals.
Test Colors and Learn the Mixes
Paint a swatch card before you start a project. Brush each color onto paper in a thin coat and a thick coat, then note how it looks dry, since acrylics usually dry a shade or two darker than they appear wet. Mix each primary with white and black to see the tints and shades you can get from the set.
A simple mixing exercise helps a lot: combine a warm and a cool version of the same color, such as a warm red with a cool red, and compare the results. You will quickly learn which combinations give clean grays and which turn muddy.
Choose the Right Surface and Brushes
Basic acrylics perform well on primed canvas, heavy paper, illustration board and wood. Thin paper can warp when the paint is applied heavily, so use a heavier weight for wet techniques. For brushes, a mix of round and flat synthetic brushes in a few sizes covers most beginner work.
Common Mistakes to Avoid
- Using too much paint from the tube. A thin, even layer dries more evenly and costs less paint over time.
- Letting paint dry on the palette. Rinse brushes promptly in water and reconstitute dried paint with a few drops of water before using it again.
- Skipping primer on porous surfaces. Unprimed paper or raw wood soaks up paint and makes colors look dull.
- Judging colors while wet. Check the value once the paint has dried.
- Storing tubes upright or in direct heat. Lay them flat in a cool, dry spot to slow drying of the caps.
Recommended Gear
- Synthetic round brush set: Holds enough paint for detail work and springs back to a point, which suits most acrylic techniques. View on Amazon
- Stay-wet palette: Keeps acrylic workable for longer by holding moisture under a sealed lid, useful when you paint in sessions. View on Amazon
- Canvas panel pack: Gives you primed surfaces for practice before you commit to a larger piece. View on Amazon
FAQ
Is the Liquitex Basics 48-color set good for beginners?
Yes. Its wide range of colors lets beginners practice mixing and color theory without buying extra tubes right away. Artists working on gallery pieces may later want higher-pigment paints.
Do I need to dilute Liquitex Basics acrylics?
Not always. You can use them straight from the tube for thick application, or thin them with water for washes. Add water gradually so the paint keeps its binding strength.
How should I store a 48-color acrylic set?
Keep the tubes capped, lying flat, in a cool and dry place. Check the manufacturer’s care guidance on the packaging or official site for specific storage recommendations.
Conclusion
A Liquitex Basics acrylic paint set with 48 colors offers a practical way to explore a full palette. Organize your tubes, test your colors, and practice mixing before starting finished work. With the right surface and brushes, you will get reliable results and learn quickly what your set can do.
Related reading
- Liquitex Basics Metallics & Iridescents Acrylic Paint Set: A Beginner's Guide
- 5 Best Vallejo Basic Usa Acrylic Colors Paint Sets (2026): Our Picks
- Liquitex Heavy Body Acrylic Paint Set Review (2026)
- Acrylic Paint Set Liquitex Review: Features and Performance
- 6 Best Acrylic Paint Set 24 Colors of 2026: Our Picks Compared
- 6 Best Acrylic Paint Basic Set Options for Beginners (2026)
Ready to choose one?
