We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Craft Smart Acrylic Paint 12 Pack Value Set Jewel: Tones and Uses Guide

Learn how to use the craft smart acrylic paint 12 pack value set jewel for cards, canvas and wood crafts, with tips on mixing, layering and getting the most fro

Updated November 2026

The craft smart acrylic paint 12 pack value set jewel is a good starting kit for hobbyists who want a range of rich, saturated colors without buying each tube separately. This guide walks you through preparing the paints, applying them in layers, and getting clean jewel tones on common craft surfaces. By the end, you will know how to test colors, mix shades and avoid the problems that usually show up with inexpensive acrylics.

Prepare Your Workspace and Surface

Acrylic paint dries fast, so set up before you open a tube. Cover your table with a plastic sheet or kraft paper and keep a cup of water and a paper towel nearby for brush cleaning. Most jewel tones look richer on a light base, so a coat of white gesso or a lightly primed surface helps the colors stay bright.

Shopping for one? See our guide: Craft Smart Acrylic Paint Value Set Review (2026): Is It Worth It?.

  1. Cover the work area with a washable mat or disposable paper.
  2. Prime wood, chipboard or canvas with one thin coat of gesso and let it dry for at least 30 minutes.
  3. Gather your brushes, a palette or paper plate, water cup and paper towels.
  4. Shake each tube gently for 10 seconds to loosen pigment that has settled.

Test and Mix the Jewel Tones

Before you paint your project, swatch each color on a scrap of the same material. Jewel tones such as sapphire, emerald and ruby can look darker when wet and lighter once dry, so wait until the swatch is fully dry before judging it. If you need an in-between shade, mix small amounts on your palette, starting with the lighter color and adding the darker one a little at a time. For more background on choosing colors and tools, see What Makes a Nice Acrylic Paint Set Worth Buying? Key Factors Explained.

Mixing Tips

  • Add white only in small amounts to lighten a jewel tone, or it will look chalky.
  • Mix a drop of the complementary color to dull a shade that looks too bright.
  • Use a dedicated palette knife or old brush for mixing so you do not contaminate your painting brushes.

Apply Layers for Rich, Even Color

Thin coats give cleaner results than one heavy layer. Load your brush lightly, then apply two or three coats, letting each one dry for 15 to 20 minutes or until it no longer feels tacky to the touch. Work in one direction for smoother coverage. Dark jewel colors often need an extra coat compared with yellows or light pastels. For more step-by-step guidance on a similar starter kit, read Craft Smart Acrylic Paint Set: A Step-by-Step Guide for Beginners.

Finish and Protect Your Project

Once the final coat is fully dry, which usually takes several hours, you can seal the surface. A clear acrylic sealer or varnish protects the color from scratches and moisture. Apply it in thin, even strokes and allow it to cure according to the label. Painted items that will be handled often, such as jewelry boxes or wooden ornaments, benefit most from sealing. If you plan to use the paint on something that will get wet or heated, consider a product designed for that purpose, such as Heat Set Acrylic Paint: A Step-by-Step Guide for Durable Crafts.

Common Mistakes

  • Painting over wet layers, which lifts earlier coats and leaves streaks.
  • Judging color while the paint is still wet, since jewel tones shift as they dry.
  • Overloading the brush, which causes drips and uneven edges.
  • Skipping the primer on porous surfaces, so the color soaks in unevenly.
  • Letting tubes sit with the cap loose, which dries out the paint inside.

A few basic tools make the paint easier to control. A set of synthetic flat and round brushes handles both broad coverage and fine detail on jewel-tone projects. A ceramic or plastic palette keeps mixed colors workable for longer than paper. Clear acrylic sealer protects finished pieces from wear.

  • Synthetic craft brush set for acrylics: good for applying thin, even coats. View on Amazon
  • Ceramic artist palette: holds mixed colors without absorbing water. View on Amazon
  • Clear acrylic sealer spray: protects finished surfaces from scratches. View on Amazon

FAQ

Can I use this paint on fabric?

Acrylic paint can be used on fabric, but it stiffens the material and is not ideal for garments that will be washed often. Check the label for fabric use and consider a textile medium if you want a softer finish.

How long should I wait between coats?

Most acrylics dry to the touch within 15 to 20 minutes in normal room conditions. Thicker coats or humid weather may need longer, so test with a fingertip on an inconspicuous area first.

Does the paint need to be thinned?

For smooth coverage, you can add a few drops of water to thin the paint slightly. Too much water weakens the color and can cause it to peel, so add it sparingly and mix thoroughly.

Conclusion

With a clean surface, thin layers and careful mixing, the craft smart acrylic paint 12 pack value set jewel can produce bright, dependable color across many projects. Test every shade on scrap material first, and seal finished pieces that will see regular handling. Practice on a few small surfaces and your results will improve quickly.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our arts & crafts supplies guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Crafts Center.