We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Craft Knife Blades Screwfix: Where to Buy and How to Choose the Right Blade

Looking for craft knife blades at Screwfix? Learn which blade shapes suit which jobs, how to match blade types to your knife, and what to check before buying.

Updated November 2026

Craft knife blades from Screwfix can handle most paper, card, vinyl and light model-making jobs, but only if you match the blade shape and fitting to your knife. This guide explains how to pick the right blade, check compatibility before you buy, and fit it safely once it arrives.

Check Your Knife Type Before You Buy

Most craft knives use one of two blade systems. Standard handles take a blade that slots into a collet or clamp, while some handles use a snap-off blade with a scored section you break off once it dulls. Look at the handle and the existing blade before you search for replacements. Many How to Change Blade on Craft Knife: A Step-by-Step Guide for Beginners resources show the fitting method, which tells you whether you need a standard or snap-off type.

Shopping for one? See our guide: 7 Best Craft Knife and Blades Sets for Crafters (2026).

Read the product listing or the packet for the blade number. Common sizes for craft knives include the number 11 pointed blade for general cutting and the number 10 curved blade for slicing. Snap-off blades are usually sold in longer strips that you break as needed.

Choose the Right Blade Shape for Each Job

Blade shape affects control and the kind of cut you get. A pointed blade reaches into tight corners and is the everyday choice for detail work. A curved blade suits long, sweeping cuts through card or foam board. A hook blade is useful for cutting vinyl and carpet, though you should use it with care.

For paper crafting and precise lines, a fresh pointed blade gives the cleanest results. If you cut thick materials, a sturdier blade will last longer than a thin one. Our guide to Craft Knife vs Scalpel (2026): Which Is Better for Paper and Craft Cutting? covers when each tool makes more sense.

Fit and Replace Blades Safely

  1. Unplug or move any nearby cutting mat clutter, and set the knife on a flat surface with the blade pointing away from you.
  2. Loosen the collet or cap using the wrench or by hand, depending on your model. Keep your fingers clear of the blade edge.
  3. Remove the old blade and check the collet for debris, paper dust or adhesive residue.
  4. Insert the new blade with the sharp edge facing the direction you intend to cut. Push it fully into the holder.
  5. Tighten the collet until the blade no longer wobbles, then test the blade movement on scrap material before starting your project.

For snap-off blades, extend only the length you need, then snap the used section off along the score line. Never leave a dull blade extended while you work.

Dispose of Used Blades Properly

Used blades are sharp enough to puncture bags and injure anyone handling household waste. Store spent blades in a rigid container, such as a metal tin or a plastic sharps box, and seal it before disposal. Local council guidance varies, so check how your area handles sharps. For a step-by-step method, see How to Dispose of Craft Knife Blades Safely: A Step-by-Step Guide.

Common Mistakes

  • Buying a blade without checking your knife’s fitting type, which leads to returns.
  • Cutting with a dull blade, which tears material and increases the chance of slipping.
  • Forcing a blade into a collet that is slightly undersized or damaged.
  • Leaving used blades loose in a drawer where they can cause injuries.
  • Skipping a test cut on scrap material after changing the blade.

A self-healing cutting mat protects your work surface and keeps blades from dulling on hard tables. View on Amazon

A metal straightedge gives you a guide for long, clean cuts and keeps your fingers away from the blade path. View on Amazon

A sharps disposal container gives you a secure place to store used blades until they can be disposed of safely. View on Amazon

FAQ

Are craft knife blades at Screwfix compatible with all craft knives?

Not always. Standard and snap-off blades use different fittings, so check your knife’s handle and the existing blade before buying. Compare the blade number against your current one when possible.

Which blade shape is best for beginners?

A number 11 pointed blade is the most common starting point because it handles general paper and card cutting well. It gives good control for detail work.

How often should I replace a craft knife blade?

Replace the blade as soon as it starts tearing material instead of cutting cleanly. Frequent changes are safer than pressing harder on a dull edge.

Conclusion

Matching the blade to your knife and your material is the key to clean results. Check fitting type, choose the right shape for the job, and dispose of used blades safely. A fresh blade and a test cut will save you time and frustration on every project.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our arts & crafts supplies guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Crafts Center.